GPS remote control function.realtime gps tracker online Production

　　(1) Remote modification of IP and port numbers on the central platform

　　The remote setting of IP and port numbers on the client mainly involves making single or batch changes to the F300 device in use. You can also change the IP and port number of the scheduling screen settings described earlier. Operate the user to open 'Vehicle Monitoring' on the client platform software ->'Parameter Settings' ->select' Communication Parameters', check the vehicle that needs to be changed, and enter the new IP and port number below (note: fill in zero before less than three digits). After confirming that there are no errors, click [Send].

　　(2) Location call

　　The monitoring center can directly call and view the designated vehicle terminal, and the vehicle terminal will immediately transmit detailed data such as the location of the vehicle to the central monitoring platform. For specific operations, please read the relevant content of the Platform Operating Instructions in detail.

　　(3) Regular return

　　The monitoring center personnel can set the time interval for timed data transmission back to the designated vehicle terminal. The factory default upload time interval is 30 seconds, and the minimum upload time interval is 5

Read recommendations:

Cantrack GT06

mini gps tracker Factory

TK08AL- RFID Car GPS Tracker

The main error and elimination algorithm in GPS positioning

GPS installation precautions.mini plastic buckles custom