GPS system functions

　　1. Real time monitoring function: The monitoring center can set the monitoring interval (the maximum time is 1 second to monitor vehicles once) to track any vehicle according to its own vehicle monitoring needs. The monitored vehicles will automatically reply to the monitoring center according to the time interval set by the center, such as the vehicle position, driving speed, running direction, time, etc. The monitoring center will record the vehicle route and vehicle status in detail on the map, The monitoring center fully monitors the use of vehicles in real time 24 hours a day.

　　2. Multi level remote networked monitoring: This system can establish a general monitoring center in the company headquarters, and can also establish different sub monitoring centers in remote branches or customers; The main center controls all vehicles, and each sub center can only monitor its assigned vehicles; The sub center will not be able to monitor or query the vehicles of other branches or customers; Realize data information sharing and multi-level remote networking collaborative monitoring management.

　　3. GIS information point addition: the monitoring personnel or system administrator can use the geographic information addition function of the system to add the location required by the company: destination, branch, warehouse, customer location, supplier address, gas station, parking lot, fixed repair shop, loading and unloading location. And other places.

　　4. Driver work monitoring: the system administrator can query and count the daily dispatching information and daily work performance of drivers.

　　5. Backup power supply: the on-board equipment is equipped with backup batteries for emergency use to ensure the implementation of control instructions.

　　6. Monitoring: After car robbery and robbery, the monitoring center starts the monitoring device in the car to monitor all conversations in the car and record the voice in the monitoring center, which is helpful for the public security department to judge the police situation and confirm the robbers.

　　7. Remote control function: After receiving the emergency alarm, the monitoring center sends out the order of power off/fuel cut-off and flameout to lock the vehicle, forcing the vehicle to stop, so as to prevent criminals from escaping by driving.

　　8. Illegal start alarm: During anti-theft fortification, when the vehicle is started illegally, the GPS on-board terminal will automatically alarm the monitoring center and display the location of the alarm vehicle on the central electronic map.

Read recommendations:

GPS Tracking company

fleet gps trackers

3000mAh Magnet Asset GPS Tracker

GPS application

What is the difference between vehicle-mounted GPS locator and vehicle-mounted GPS?Fleet management