What's wrong with the fast power consumption of electric vehicles equipped with GPS locators?simple gps tracking

　　GPS locator is an electric vehicle anti-theft device, but some users find that after installing GPS locator on electric vehicles, the battery usage time becomes shorter. This is because ordinary GPS locators usually transmit signals every tens of seconds or tens of seconds, and even when the car is parked, they continuously consume battery power, which is caused by high power consumption. To solve this problem, GPS locators are equipped with motion sensors, It can intelligently determine the driving status of the electric vehicle, enter standby sleep mode when the vehicle is stationary, and the power consumption can be almost negligible

　　There is another situation where the power supply voltage of the GPS locator purchased is lower than the voltage of the battery car. Do not use it. Some friends will only connect a part of the battery to achieve work. For example, the battery car has 4 batteries, each with a voltage of 12V. The overall voltage of the battery car is 48V, and the power supply voltage of the GPS locator is 24V. Therefore, users choose to connect two of the batteries to power the locator. In this case, Uneven power consumption among the four batteries can quickly lead to feeding of the two batteries that are connected to the locator, resulting in battery damage and reduced battery capacity, seriously affecting battery life. Be sure to purchase a locator that meets the voltage of the battery car. For example, the power supply voltage of the T09 locator is 9-95V, which can be directly connected to the battery car power supply, so this phenomenon will not occur

Read recommendations:

fleetmanagement webfleet solutions

simple gps tracking distributors

G03

Detailed introduction to GPS satellite constellation.plug & play Obd gps tracker wholesaler

The obvious advantages and characteristics of GPS products