4G GPS Tracker Factory

There are some factors to consider when choosing a 4G GPS Tracker, First of all, you need to choose a tracker with good signal coverage and positioning accuracy. In general, the more satellite positioning systems a tracker uses, the wider the signal coverage and the higher the positioning accuracy. Therefore, it is recommended to choose trackers that use several satellite systems.

Project Details

1. Features

◇ Real-time tracking by APP/Platform

◇ Movement/Ignition on/off alarm

◇ SOS alarm/speeding / ACC detection

◇ Power Cut alarm with internal battery

◇ Angle change update location

◇ Memory storage when signal lost

◇ Set flexible sleep mode

◇ Set GPS not drifting after parking

◇ Remote check SIM card balance fee

◇ Set Less GPRS data mode

◇ Set Driving behavior monitoring

◇ Remote controller set arm or disarm (Optional)

◇ Disable fuel or electricity (Optional)

◇ Vibrate/ACC alarm trigger speaker sound (Optional)

◇ Welcome customization Shell or function

2. Specs.

Content	Specs.
Dim.	854517mm
Network	LTE/GSM/GPRS
Frequency(4G+2G)	LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 GSM :850/900/1800/1900Mhz
Module & Chipset	SIMCom LTE Cat 1 Module A7670 Series+AT6558R
GPS channel	66
Tracking sensitivity	-165dBm
Location accuracy	<5 meters CEP
Time To First Fix(open sky)	Cold status <35s Hot status <1s
Working voltage	9-36VDC
GPRS Protocol	Class12, TCP/IP
Operating temp.	-20°C to +70°C
Back up battery	200mAh /3.7V Li-Polymer battery
Standby & Working consumption	5mA~50mA
GSM / GPS antenna	Built-in
G-Sensor	Support
Memory storage	2000 data
Ignition status detection	Support
Micro USB interface	Flash firmware/Configuration
Configuration Mode	PC – USB/GPRS /SMS
OTA	Support
Power interface	8 PIN or 4PIN version