GPS receiving antenna

　　The function of the GPS receiving antenna is to convert the electromagnetic wave energy of the radio signal from the satellite into the current that the receiver electronic device can ingest and apply. The size and shape of the antenna are important because these characteristics determine the antenna's ability to pick up weak GPS signals. As required, the antenna can be designed to work on a single L1 frequency, or it can work on two frequencies, L1 and L2. Since GPS signals are circularly polarized waves, all receiving antennas are circularly polarized. Despite various constraints, there are still many different antenna types, such as monopole, dipole, helical, quadrifilar helical, and microstrip antennas.

　　There are generally two types of built-in antennas for GPS receivers we see on the market - flat-panel antennas and four-armed helical antennas. What are the advantages and disadvantages of the two antennas? Let us answer them for you.

　　Panel antennas are the most common type of antenna due to their durability and relative ease of fabrication. Its shape can be round, square or rectangular, like a copper-clad printed circuit board. It consists of one or more pieces of metal, so the most common shape for GPS antennas is a lumpy knot, like a biscuits. Since the antenna can be made small, it is suitable for aerospace applications and personal handheld applications.

　　Another major characteristic of an antenna is its gain pattern, or directivity. Using the directivity of the antenna can improve its anti-dry and anti-multipath ability. In precise positioning, the stability of the phase center of the antenna is a very important index. However, in ordinary navigation applications, people hope to use an omnidirectional antenna to receive at least the visible satellite signals in all the sky within a field of view of five degrees above the antenna horizon. However, when the flat-panel antenna is directly above the satellite, the signal gain is the largest. , there are two problems:

　　1. The receiving range of the tablet is above the tablet, and the tablet should face the sky, which will bring trouble to hand-held and vehicle-mounted. We can see that there are more and more CF receivers with adjustable angles (foldable SDGPS), because the tablet The characteristic of the type antenna makes the manufacturer come up with a trick for the receiver to have a better reception effect.

　　2. We know that although the satellite signal above our head is better and easier to lock, the satellite above is actually the most useless. If there is no low-angle satellite, the error will be relatively high, and the accuracy will be very high. Difference. So based on these shortcomings, four-arm helical antennas have also been used on GPS receivers.

Read recommendations:

GPS Tracking Manufacturing

Cantrack TK100

GF70L-Solar Magnetic Asset GPS Tracker

GPS navigation satellite has a high-precision atomic clock for time service

Where is the GPS positioner generally installed.gps tracker with magnet distributors