Yes, all mobile terminals can achieve management and anti-theft through GPS positioning, but depending on the mechanical equipment, different GPS locators can be selected to achieve the best effect. Taking a tractor as an example, the first step is to determine whether there is an electric battery on the tractor, whether the tractor is electrically or physically ignited (with a handle). To determine if the GPS locator can be powered by the on-board power supply.

　　1. Tractors with batteries

　　Tractors with batteries can achieve real-time power supply to GPS locators, and T3A intelligent GPS locators can be installed. It can achieve a series of functions such as real-time monitoring, trajectory playback, work reports, etc. The owner or manufacturer can monitor the tractor's position, status, speed, etc. at any time through their mobile phone or computer, which is no different from ordinary car GPS positioning. Of course, during installation, it is necessary to check whether the working voltage of the GPS matches the voltage of the tractor battery. For example, the working voltage of the T3A intelligent GPS locator is 9-80V.

　　2. Tractors without batteries

　　Some tractors use manual power to start the diesel engine for operation, so there is no battery that can be powered on the vehicle. This requires the installed GPS locator to have its own power supply, and an ultra long standby GPS locator can be selected. However, due to the limited power supply of the GPS self power supply, real-time online positioning is generally not guaranteed, and location information can be set several times a day. This type of GPS locator is often used for anti-theft purposes, Due to its inability to ensure real-time positioning, the position error is usually large and not very suitable for management.

　　3. It is necessary to consider the waterproof degree of the installation position of the tractor

　　Mechanical vehicles and equipment such as tractors are generally not as waterproof as cars, and electronic modules are very afraid of water ingress. Therefore, for mechanical vehicles and equipment with poor waterproof effect, it is recommended to choose a GPS locator with waterproof effect. For example, the T8 intelligent GPS locator has IPX7 level waterproof performance, which can even be used for immersion installation work, greatly reducing equipment damage caused by poor waterproof, moisture-proof, and dustproof performance, and greatly extending the service life of the equipment.

Read recommendations:

mini gps tracker supplier

real-time gps tracking supplier

G500L -4G OBD GPS Tracker

This section describes GPS working modes

GPS system architecture and analysis