Installation of GPS navigator

　　(1) Press the bracket into the splint and push upward;

　　(2) Tore off the plastic film at the bottom of the bracket, and the plastic seat vertically pressing the windshield to squeeze out the air in the plastic seat;

　　(3) Press the fixed device of the bracket towards the base;

　　(4) Put the navigator on the splint groove.

　　Disassembling:

　　(1) Remove the navigator from the bracket;

　　(2) Raise the fixed device of the bracket;

　　(3) Lifting the exposed part of the plastic seat at the bottom, let the air enter, you can remove the bracket.

　　Use the touch pen (1) click: click the screen once with the pen tip;

　　(2) Double -click: Use the pen tip to click on the screen twice in a row;

　　(3) Drag: Press a point with a pen tip, then move the pen tip. Please do not leave the screen during the movement.

　　1. For the first time, please do it in the open space.

　　2. Do not operate the navigation system while driving to ensure driving safety.

　　3. Do not disassemble the equipment by yourself. The equipment is faulty, please send it to qualified maintenance personnel for repair.

　　4. In the following circumstances, do not turn off the power directly: navigation, playing movies, music and pictures.

　　5. Running multiple programs at the same time may cause system failure.

　　6. Do not press the LCD screen hard. Please use a dry soft cloth cleaning navigator. Do not use alcohol or other cleaners to clean the navigator.

　　7. The pen tip has damaged touch pens, ballpoint pens, or any other sharp and rough objects. It may cause damage to the screen. Please use the pen tip to be intact.

　　8. Do not expose the equipment in the sand or dust environment. Do not leave the navigation equipment under the windshield to avoid the battery's overheating, causing failure or danger.

　　9. Do not close the equipment that will produce strong wireless radio waves or radiation places, which may cause the equipment to be unable to run normally.

　　10. In order to prevent electric shock, insert the plug into the socket completely.

　　11. Pay attention to the compatibility of multimedia files. The device can only play file systems that meet equipment design rules.

　　12. When reading and writing the memory card, do not take out the memory card, otherwise it may destroy and lose the information in the memory card.

　　13. Do not use earphone headphones for a long time, which will cause hearing damage.

Read recommendations:

plug & play Obd gps tracker

fleet gps trackers Processing

10000mAh Magnetic Asset GPS Tracker

What are the commonly used car GPS positioner?

GPS overview and principle introduction