1. After approved the loan of the credit manager of the car loan company, contact the GPS manufacturer to install the GPS positioning terminal for the mortgage vehicle.

　　2. Check whether the installation of the vehicle's GPS equipment is correct, whether the installation location is hidden, and the test positioning information is accurate.

　　3. Through the GPS system, risk control personnel can check whether the mortgage vehicle has warning information and the degree of risk of mortgage vehicles.

　　4. If there is a situation, you can understand the location information of the risk customers in order to take measures in time to recover the vehicle.

　　Introduction

　　1. GPS positioning battery low -electric alarm

　　The first meaning is that when the battery in the GPS positioner (mostly the wireless GPS locator) is about to be exhausted, in order to prevent the situation that cannot be located due to power consumption, the positioner will send out to the owner before the battery is exhausted. Low -electricity prompts so that the owner can charge the positioner battery in real time.

　　When the device issues a low -power alarm, the measures are: ① When the wireless real -time positioning charging equipment takes over to the low -power alarm information, it needs to be charged in real time; ② When the wireless charging equipment takes over to the low -power alarm information, the device needs to be replaced in real time.

　　Note: After the positioning device is opened in real time, the power consumption will be faster. If not needed, it is recommended to close real -time positioning and adopt a one -day positioning mode.

　　2. Low the battery battery battery in the vehicle

　　The second low -power alarm function is mainly used for the alarm prompt for vehicle batteries. Most of this positioner is a wired GPS locator.

　　This positioner can automatically detect the battery state of the vehicle battery. When the battery is detected, it will actively send low -electric alarm information to users.

　　This battery low -power alarm function is actually to protect the battery. Since this is the alarm of the vehicle battery locator, this alarm function is also called "external low -electric alarm function".

Read recommendations:

Cantrack GT06

gps tracker for bike

3000mAh Magnet Asset GPS Tracker

GPS receiver work principle.gps tracker no monthly fee Manufacturing

Controversy over mandatory installation of locators with video surveillance in taxis