gps vehicle tracker.How to use GPS navigators

　　If you have spent a long time locating a newly purchased GPS navigator and still cannot locate it during your first use, you can proceed as follows:

　　1. It is not possible to search for stars indoors, so try to locate them outdoors as much as possible.

　　2. Stay away from high-rise buildings or obstructed areas above (such as under elevated bridges), and in some special areas, blind spots may appear due to interference signals such as radiation, making it difficult to locate. If unable to locate in a certain location, please move to a distance of more than ten meters.

　　3. When searching for stars in the car, we should use a bracket to install it on the front windshield. In addition to the second reason, we should also check whether the front windshield is covered with a metal film. Due to the screen wall effect of the metal film on wireless signals, the satellite signal strength is too weak to locate.

　　4. Also, please note that when using, do not place the two GPS navigators too close together. The GPS distance for different models should exceed 10 centimeters. Please try to maintain a distance from other brands of GPS, as the signal amplification circuit of GPS can generate radiation and pose a threat to human health.

　　5. Before using the GPS navigation system to search for stars for the first time, it must be turned on and charged for 4 hours, otherwise slow search may also occur.

　　6. If none of the above 5 situations exist, the time you spent searching for the satellite still exceeds 5 minutes. At this point, you need to press the "Reset" button or the reset button to restart, and there is no need to keep waiting.

Read recommendations:

simple gps tracking wholesale

vehicle gps tracker webfleet solutions

G03

Main Errors in GPS Positioning and Their Elimination Algorithm

How to solve the car GPS positioner?fleet management software webfleet solutions