Teach everyone how to connect the driving recorder.vehicle gps tracker wholesale

　　Many car owners have purchased a dash cam, but they are not very familiar with the wiring. Below, the dash cam manufacturer will share with you how to connect the dash cam.

　　1. ACC power supply. Generally speaking, there is a secondary fuse box under the steering wheel in the driver's seat. We can find the ACC fuse in this secondary fuse box, and then directly plug the power plug of the dash cam into the ACC fuse. Users need to check the user manual to obtain the ACC password in order to achieve power supply. As for the wiring method, it adopts a concealed wiring method around the A-pillar. And using this wiring method will not affect the original vehicle power supply.

　　2. Directly charge the battery. This method requires the line to be directly introduced into the engine compartment through the driver's cab, and then connected to the battery. This power removal method also requires the use of concealed wiring around the A-pillar. However, the disadvantage is that the dash cam cannot be manually turned off, but it is suitable for a 24-hour uninterrupted dash cam.

　　3. Wiring at the cigarette lighting point. This is a simple and common wiring method. We just need to insert the switch of the DASH CAM into the cigarette lighter, take the power, and then let the DASH CAM route from the Glovebox, A pillar and other positions. Moreover, this wiring method is also very convenient for car owners and friends to operate. By unplugging the cigarette lighter, the dash cam will automatically turn off. However, the disadvantage is that it will occupy the position of the cigarette lighter, and the wiring of the Glovebox will be exposed. But for non smoking car owners, this is a good wiring method.

Read recommendations:

gps vehicle tracker distributors

Pet GPS Tracker manufacturer

G900LS J16-4G Car GPS Tracker

Introduction to GPS Navigation System

Car GPS Pharmaceutical Pharmacopoeia