gps vehicle tracker.Installation precautions for GPS locators

　　Installation precautions for Beidou 4G wiring GPS locator:

　　1. All device traffic cards have been installed at the factory and do not require a new card upon receipt.

　　2. It is not recommended to exchange devices for the data card equipped with the device.

　　3. Before installing the device, the power switch next to the data card must be turned to ON.

　　By using the device indicator light, the position of the power switch can be determined. Before the device is powered on to the vehicle, turn the power switch to ON and the device indicator light will flash. Turn the power switch to OFF and the device indicator light will not flash (it is recommended to turn on the device power switch before turning on the vehicle power).

　　4. To ensure that the device can search for Beidou and GPS satellite signals well, it is recommended to install the device with one side facing the sky with an indicator light.

　　5. Try not to place the equipment in areas such as iron pipes, barrels, navigation screens, etc. that may interfere with Beidou and GPS satellite signals.

　　6. If you have a device that needs to be renewed, please contact the dealer at the time of purchase to renew it. Do not renew it yourself.

　　7. Regarding the waterproofing of the equipment, the wiring GPS locator does not have waterproofing performance, and the equipment must be placed in a location that is not easily exposed to water during installation.

Read recommendations:

Gps speed limiter

obd-II port gps tracker

YG119- Hunting Dog GPS tracker

GPS data reception

GPS logistics tracking and monitoring platform architecture